Skip to content

LTO TeraPack Tray Waterproof Protective Case - 3 Capacity

SKU 07-039016
Original price $210.00 - Original price $210.00
Original price
$210.00 - $210.00
Current price $210.00

*TeraPacks not included

This waterproof heavy duty case stores 3 LTO tape TeraPack trays (24 tapes total) and provides protection against the key problems that cause data loss:

  • physical damage from impact
  • tape distortion from wound in-debris
  • fast and large changes in temperature and humidity
Download Data Sheet
      • Superior cushioning and no exposed foam or debris generating agents
      • Waterproof
      • Dustproof
      • ATA Impact certified
      • Stainless steel hardware
      • Double movement latches prevent accidental opening
      • Double padlockable
      • Lifetime warranty
      Shipping dims: 20" x 17" x 8"
      Shipping weight: 10 lbs

      Compatible Locks

        Waterproof  IPX7
        Dustproof  IP6X
        Impact  ATA 300 
        Drop Test  ASTM D-4169 CC-18
        Vibration  STM D-4169 DC-18
        Rainfall  ASTM D-4169 DCc-18 
        Immersion  MIL-STD-810F

        Descriptions of Tests 
        ATA Specification 300 Category 1
        Airline transport container suitable for a minimum of 100 airline trips
        Impact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure.

        ASTM D-4169 DC-18
        Level 1 Schedule A Handling (Manual)
        Drop tests - a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition.

        ASTM D-4169 DC-18
        Level 1, Schedule F loose load vibration
        Vibration - The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads.

        ASTM D-4169 DC-18
        Level 1, Schedule H Environmental Hazard Rainfall
        Simulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C.

        Method 512.4
        Immersion - The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.
        IP 67 ingress protection
        6- Total protection from dust
        7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)