Waterproof, Anti-Static Laptop Case (wheeled) - 10 Capacity

This dustproof, waterproof heavy duty case with anti-static foam protects and carries up to 10 laptop computers with cords.  Fits laptops up to 15.5" x 10.5" x 1.25" in size and should accommodate laptops specified with a diagonal up to 18 inches.  This case has two durable wheels and a "telescoping" handle for easy use. 

• Waterproof
• Precision cut foam holds laptop computers securely
• Pink foam dissipates static charges
• ATA Impact certified 
• Weight: 25 lbs
• Inside Dimensions: 29" x 18" x 14"
• Outside Dimensions: 32.5" x 21" x 15.8"
• Accepts 2 padlocks
• Dustproof
• Stainless steel hardware prevents rust
• Double movement latches prevent accidental opening for added protection
• Lifetime warranty

Shipping dims: 33" x 22" x 16"

Certifications 
Waterproof  IPX7
Dustproof  IP6X
Impact  ATA 300 
Drop Test  ASTM D-4169 CC-18
Vibration  STM D-4169 DC-18
Rainfall  ASTM D-4169 DCc-18 
Immersion  MIL-STD-810F

Descriptions of Tests 
ATA Specification 300 Category 1
Airline transport container suitable for a minimum of 100 airline trips
Impact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure.

ASTM D-4169 DC-18
Level 1 Schedule A Handling (Manual)
Drop tests - a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition.

ASTM D-4169 DC-18
Level 1, Schedule F loose load vibration
Vibration - The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads.

ASTM D-4169 DC-18
Level 1, Schedule H Environmental Hazard Rainfall
Simulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C.

MIL-STD-810F
Method 512.4
Immersion - The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.
IP 67 ingress protection
6- Total protection from dust
7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)